How to Program the Nissan Intelligent Key

Reprogram Nissan Key Fob: Nissan Intelligent Key

1. To begin Nissan key fob programming, step inside the vehicle with the Nissan Intelligent Key. You will need to lock the doors.
2. Insert the key into the ignition, but don’t start the car. Take the key out and repeat this step approximately six times. Keep in mind that it may take up to 10 times to be successful. The hazard lights will flash twice when the car accepts the Nissan Intelligent Key.
3. When the step above is complete, the vehicle is in program mode. Put the key back in the ignition and turn the key to activate. The electrics should turn on, but you do not want to start the vehicle.
4. As soon as possible, press any button on the Nissan Intelligent Key. If this step is not done quickly enough, it will not work.
5. Test your Nissan Intelligent Key. Stand away from the vehicle and click the buttons on the fob. If the lights flash or the horn beeps once, you will know that you successfully programmed the Nissan Intelligent Key.
6. You’ll also want to test it in close proximity before driving off. Walk up to your Nissan and open the door. You should be able to open the door and not have to press any buttons on the fob.

How to Program Nissan Key Fob

What if your Nissan vehicle comes with a traditional key fob. No problem! We can show you how to program a Nissan key fob below: 

1. Get into the driver’s seat of your Nissan vehicle. Make sure all the doors are closed and locked. 
2. Put the key into the ignition and turn it to “ACC.” Turn it off and take the key out of the ignition. Quickly repeat this process six times. When this is done, the emergency lights should flash twice. 
3. Put the key back in the ignition and turn it to “ACC” once again. Press and release any button on the fob. When the vehicle recognizes the new remote, the hazard lights will flash. Unlock and lock the driver’s side door. If you need to program additional key fobs, press any button on your next fob. 
4. When you are done, turn the ignition key to the “OFF” position and remove the key from the ignition. 

Contact Greenway Nissan of Jacksonville for More Information 

If you have any questions about how to program a Nissan Intelligent Key or Nissan key fob reprogramming, do not hesitate to reach out to your Nissan experts at Greenway Nissan of Jacksonville. We would be delighted to assist you. You can also set up an appointment with our service team.